logo
Suzhou Gaopu Ultra pure gas technology Co.,Ltd
products
News
Home > News >
Company News About Instrument air treatment system
Events
Contacts
Contacts: Mr. Lu YingYun
Fax: 86-512-68088636
Contact Now
Mail Us

Instrument air treatment system

2026-12-19
Latest company news about  Instrument air treatment system

Instrument air is compressed air that has been treated, purified, dried, and conditioned to meet the quality requirements of pneumatic instruments and control systems.

It is commonly used in industrial facilities such as oil and gas plants, petrochemical plants, refineries, and power stations.

1. Definition of instrument air

Instrument air is a clean, dry, oil-free (or suitably oil-controlled) compressed air supply used to operate:

  • Pneumatic control valves.
  • Control valve actuators.
  • Pneumatic positioners.
  • I/P converters.
  • Pneumatic instruments and controllers.
  • Other pneumatic control devices.
2. Instrument air treatment system

A typical instrument air system consists of:

  1. Air compressor: Compresses atmospheric air.
  2. Aftercooler: Reduces compressed air temperature.
  3. Moisture separator: Removes condensed water.
  4. Air receiver: Stores compressed air and stabilizes system pressure.
  5. Air dryer: Removes moisture to achieve the required dew point.
  6. Pre-filter: Removes liquid water, particles, and contaminants.
  7. Coalescing filter: Removes oil aerosols and fine particles.
  8. Final filter: Removes remaining fine particles.
  9. Distribution system: Delivers clean, dry compressed air to instruments.
3. Typical instrument air quality requirements

Actual requirements depend on the project specification and applicable standards.

Parameter

Typical requirement

Pressure

6–8 barg

Pressure dew point

-40°C

Oil content

Very low, typically 0.01 mg/m³ or less

Solid particles

Filtered, typically 1–5 μm

Moisture

Very low

Contamination

Free from harmful dust, oil, and liquid water

4. Instrument air vs plant air

Item

Instrument air

Plant air

Purpose

Operating instruments and control valves

General industrial applications

Air quality

High

Normal

Moisture

Very low

May contain more moisture

Oil contamination

Strictly controlled

Less stringent

Dew point

Typically -40°C

Usually less stringent

Filtration

Fine filtration

General filtration

Important: Instrument air must be sufficiently clean and dry to prevent corrosion, blockage, malfunction, and inaccurate operation of pneumatic instruments.

5. Relevant standards
  • ISO 8573-1: Compressed air contamination classes.
  • ISO 8573-3: Humidity measurement.
  • ISO 8573-2: Oil aerosol testing.
  • ISA-7.0.01: Quality standard for instrument air.

I can also explain the complete instrument air system P&ID, including compressors, dryers, air receivers, filters, pressure control, and distribution headers.