The dew-point temperature in a nitrogen generator refers to the temperature at which water vapor in the generated nitrogen gas begins to condense into liquid water at a given pressure.
It is an important parameter for determining the dryness and quality of nitrogen gas.
|
Nitrogen application |
Typical pressure dew point |
|---|---|
|
General industrial nitrogen |
-20°C to -40°C |
|
High-purity nitrogen |
-40°C to -60°C |
|
Electronics and semiconductor |
-60°C to -70°C |
|
Ultra-dry nitrogen |
-70°C to -80°C |
-20°C: Relatively dry nitrogen.
-40°C: Very dry nitrogen.
-60°C: Extremely dry nitrogen.
-70°C or lower: Ultra-dry nitrogen.
The lower (more negative) the dew-point temperature, the less moisture the nitrogen contains.
Air dryer performance: Removes moisture from compressed air before nitrogen separation.
Membrane or PSA technology: Different nitrogen generation technologies have different moisture characteristics.
Operating pressure: Pressure affects the measured pressure dew point.
Air filtration: Poor filtration can affect the performance of the generator.
Operating conditions: Temperature, humidity and flow rate can influence moisture levels.
There are two types of dew-point measurements:
Atmospheric dew point: Dew point measured at atmospheric pressure.
Pressure dew point (PDP): Dew point measured at the actual operating pressure of the nitrogen pipeline.
These values are not interchangeable.
To give you a more accurate specification:
Are you using a PSA nitrogen generator or a membrane nitrogen generator?